Iron Coast Industrial
  1. Home
  2. Guides
  3. Dealer, auction or direct sale
Guide

Dealer, auction or direct sale: which works for your used equipment

Used industrial equipment usually leaves a shop one of three ways, and each trades price against speed and effort differently. Here's how each route works, what it asks of you, and how to pick the one that fits your machines and your deadline.

  • Published
  • 6 min read
  • For owners and plant managers

The short answer

There are three main ways to sell used industrial equipment. You can sell direct to a business that will use the machine. You can sell to a dealer, who buys it, takes it away and resells it. Or you can sell at auction, where an auction house markets it to many bidders at once and it goes to the highest one.

The right one depends on what you're selling, how much there is, its condition and, above all, how long you have before the floor must be empty.

Key decision

Start from your deadline, not from the price you hope for. A route that can't finish before your move-out date isn't a real option, however good the price looks on paper.

Selling direct to a buyer

In a direct sale you sell to the business that will actually run the machine: another manufacturer, a job shop, a school, a company building out a new line. There's no one in the middle who needs to resell it at a profit, so a buyer who needs exactly your machine is often the one who can pay the most for it.

The catch is that the right buyer may not be looking this week, and a direct sale asks the most of you:

  • Finding the buyer, or someone who can find them for you.
  • Sending photos and specs, and showing the machine running under power.
  • Agreeing price, payment terms and who handles rigging and transport.
  • Making sure payment has cleared before anything leaves your building.

Fits best: one machine or a small group, in good running order, with a deadline a month or more away and someone on site who can show it.

Selling to a dealer

A used equipment dealer buys your machine outright, takes on the job of reselling it, and usually arranges removal. You get one price, one payment and one pickup.

A dealer's offer will normally be lower than a direct buyer would pay, because the dealer carries the cost and risk of moving, storing, sometimes repairing and reselling the machine. You trade a lower number for speed and certainty.

Many dealers can make a first offer from good photos, nameplate details and an honest description of condition, then confirm when they see the machine. Dealers who specialize in your kind of equipment, such as machine tools, food processing or material handling, know who buys it and usually value it better than a generalist.

Fits best: a short deadline, machines that need work or aren't running, or an owner who would rather not deal with buyers at all.

Watch for offers that change after the visit. Get the price, pickup date and who pays for rigging in writing.

Selling at auction

An industrial auction house catalogs and photographs your equipment, markets the sale to its buyers, runs the bidding (today usually online, over several days), collects payment and schedules pickups. It earns commissions and buyer's premiums, on terms that vary by house.

Auctions are built for volume: a whole plant or a long list that would take months to sell piece by piece. They also run to a fixed date, which matters when a lease end can't move.

You provide access for the auction team to tag and photograph everything, a preview for bidders, and a removal window afterward.

Fits best: a lot of equipment, a firm deadline, and an owner who wants everything gone in one organized event.

The trade-off is price certainty. In a sale without a reserve, each item sells for what bidders offer on the day. Some auction houses also offer guaranteed minimums or will buy the lot outright. Read each proposal carefully, and compare more than one house before you sign.

Side by side

The three routes compared. General patterns, not promises: every machine and market is different.
Direct saleDealerAuction
Price potentialOften highest, for the right machineLower, in exchange for speedSet by bidders on the day
SpeedWeeks, sometimes longerCan be daysFixed date, planned weeks ahead
Your effortHighestLowestModerate: access and a removal window
Best forOne or a few good machinesShort deadlines, machines that need workWhole plants and long lists
CertaintyLow until paidHigh once the offer is signedDate certain, price not
RemovalAgreed with the buyerUsually the dealerBuyers, scheduled by the house

How to decide: five questions

  1. When must the floor be empty?Under a month points to a dealer, or to an auction that's already on the calendar. With no fixed date, a direct sale has room to work.
  2. How much is there?One machine rarely justifies an auction of its own. A full plant is usually too much to sell one machine at a time.
  3. Does it run?Equipment you can show under power sells best direct. Machines that need work suit dealers, who can price the repair in.
  4. Is there a standout?A late-model machine or a complete, working line may be worth selling separately first.
  5. Who will be on site?Direct sales and auctions need someone to open doors and supervise removal. If nobody can, lean toward a dealer.
Rule of thumb

Short deadline or poor condition: dealer. Lots of equipment and a fixed date: auction. Good machines and time to wait: a direct buyer.

For a quick read on your own situation, the Iron Coast route finder asks three of these questions and suggests a likely route.

You can mix routes

You don't have to send everything one way. In a closure it's common to sell a few standout machines direct and let a dealer or an auction clear the rest. Decide the split before you sign anything, because auction houses want to know early what's in the sale. Our guide to handling equipment when a plant or shop closes covers the order of work.

Mistakes that cost sellers money

  • Cutting power too early. A machine that can be shown running is easier to sell and easier to trust.
  • Losing the extras. Manuals, tooling and spare parts help a machine sell.
  • Releasing equipment before payment clears. Confirm a wire transfer with your own bank, and walk away from anyone who overpays and asks for the difference back.
  • Taking the first offer. For a whole plant especially, compare proposals.
  • Leaving removal vague. Who rigs, who pays, by what date, and who fixes any damage to the building should all be in writing.

Where Iron Coast fits

Iron Coast Industrial works between you and all three routes. We look at what you have and your deadline, find the buyer, dealer or auction house that fits, and introduce you. You deal with them directly, and payment goes straight from them to you.

Our fee is agreed in writing before any introduction and is normally paid by the buyer, dealer or auction house, so there's nothing for you to pay up front. We work with equipment only, never whole businesses or real estate.

Questions owners ask

Is an auction or a dealer better for a whole plant?

It depends on the deadline and the mix of equipment. Auctions are designed for long lists and fixed dates, while a dealer may buy a whole plant outright if it fits their specialty. Getting a proposal from each is the safest way to compare.

Should I repair a machine before selling it?

Usually not. Clean it and photograph it well, but repairs rarely pay for themselves before a sale. It's normally better to describe the problem honestly and let the buyer or dealer price it in.